TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
INSTALLATION AND SETUP • OPERATION
16
The XAP 800 is operated with G-Ware software. A few parameters can
be changed through the LCD panel on the front of the unit, as
discussed in the LCD Programming section (page 10).
A remote controller can be used to operate the XAP 800, but is not
necessary.
Operation
A complete set of worksheet templates for configuring various XAP
800 functions are located in the XAP 800 White Paper document on
the AP Products CD provided.
To Next Page
Loading...