Zenith10/20 GNSS Series - 15 -
Installation Guide
© 2011 GeoMax AG, Widnau, Switzerland
Note: Make certain that the entered Device ID is correct the first time, since an
activation key cannot be generated again with a different ID.
The activation key will then be displayed in the password field. Enter this key into the
handheld at the provided fields and click Apply Key. More details about the
FieldGenius installation and registration can be found in the
FieldGenius_Registration.pdf document available from GeoMax downloads.
4.5 CONNECTION TO THE GNSS RECEIVER
The first screen displayed when starting FieldGenius is the Project Manager. Create a
new project by tapping the appropriate icon and enter a project name. The onscreen
keyboard can always be accessed by double tapping on the editable field. The screens
that follow are used to set the default settings for this project.
To Next Page
Loading...
Need help?
General
