GeoMax Zenith10/20 SERIES User Manual

Zenith10/20 GNSS Series - 16 -
Installation Guide
© 2011 GeoMax AG, Widnau, Switzerland
At the Instrument Selection screen, the connection to the receiver can be made.
Ensure that the receiver is switched on and select either GPS Rover or GPS
Reference. In the Instrument Profile window, tap ADD and enter a name for your
receiver. Save the name and then tap EDIT to configure the profile.

GeoMax Zenith10/20 SERIES Specifications

General

Brand	GeoMax
Model	Zenith10/20 SERIES
Category	Receiver
Language	English