3 PREPARATION OF THE GNSS RECEIVER
3.1 Introduction to the GeoMax Zenith60 WebManager
The GeoMax Z60 WebManager (web application) can be used to set up, configure and operate
the instrument, download data from the instrument and microSD card, and upload licence keys
and firmware.
3.2 Connect to your Zenith60 receiver via WiFi
Turn on the Zenith60 sensor. Make sure that the wireless modem on the PC or WiFi enabled device
is turned on and you are able to search for available “WiFi connections”.
Select the WiFi name that corresponds to the serial number of your Zenith60.
To Next Page
Loading...
