LED Status Description
Flashing green Zenith60 is in rover mode. RTK data is being
received at the interface of the communication
device.
Yellow Zenith60 is in RTK base mode. No RTK data is
being passed to the interface of the communica-
tion device.
Flashing yellow Zenith60 is in RTK base mode. RTK data is being
passed to the interface of the communication
device.
Power LED Off The batteries are not connected, are both flat or
the Zenith60 is switched off.
Green Total power is 20% - 100%.
Red Total power is 5% - 20%. The remaining time for
which enough power is available depends on the
type of survey, the temperature and the age of the
batteries.
Fast flashing red Total power is low (< 5%).
Bluetooth LED Off Bluetooth is not connected.
Blue Bluetooth is connected.
All LED Flashing
sequentially
The factory reset is initiated.
Bluetooth LED
Power LED
RTK LED
Position LED
Flashing blue
Solid green
Flashing green
Flashing green
The recovery process is initiated.
17
User Interface
To Next Page
Loading...
Need help?
General
