GeoMax Zipp02 User Manual

Zipp02 | 26Operation Method
3. Display of slope
• If the inclination is greater than ±3’, the
instrument will display as shown in the
figure
Press V% button, the vertical angle display is
turned into slope display; press V% button,
the vertical angle display is resumed.

When vertical angle is turned into slope,
the precision of slope is to the fourth digit
after the decimal.
The value of the slope is shown in the
range of ±99.99% (±45°); outside of
this range no value is displayed.

GeoMax Zipp02 Specifications

General

Brand	GeoMax
Model	Zipp02
Category	Measuring Instruments
Language	English