GeoMax Zipp02 - Initial Settings Configuration

Preparation before Measurement Zipp02 | 19
3.6 Initial Settings

Before start measuring, please confirm all initial settings. Items in bold indi-
cate factory settings.
Initial Setting Selection
1. Unit of angle 360°
UNIT A
400G
UNIT B
6400
UNIT C
2. Zenith angle ZEN==0° ZEN==90°
3. Auto power off time 30 OFF NO OFF
4. Minimum display
resulution
DSP 1 DSP 5
5. Tilt sensor switch TILT ON TILT OFF
6. Indication of position
of horizontal angle
NO BEEP 90 BEEP