Error Information Zipp02 | 63
11 Error Information
Error codes
Display Meaning and dealing method
E01 Count error,if displayed repetitively, repair is needed.
TOO FAST The telescope or collimation unit rotated too fast, press any
button except ON/OFF and , the instrument returns to
normal state.
E04 Horizontal sensor I error, repair is needed.
E05 Horizontal sensor II error, repair is needed.
E06 Vertical sensor error, repair is needed.
TILT the tilt sensor out of range, level the insturment again, if
invain, repair is needed.
ļ
Set off the tilt sensor, the instrument can work also.
To Next Page
Loading...
Need help?
General
