Geotech G200 - Panel Key Functions

Page 14 of 61
Operating Manual
www.geotechuk.com
OMG200N Iss.04
© QED Environmental Systems Ltd.
G 2 00 R A N G E
Panel Key Functions
Key
Description
Function
A
Main Read Screen
Start and end screen when using the instrument.
B
Soft Keys
The function of the three ‘soft-keys’ on the front of the
instrument panel are determined by menu options
taken. Functions vary from screen to screen.
C
On/Off Key
Press the ‘On/Off’ key briefly to switch the instrument
on and off.
D
Pump Key
Press the ‘Pump’ key to start or stop the pump.
E
Scroll Left Key
Also ‘Key 4’. Enables the operator to scroll left to
display more information.
F
Scroll Down Key
Also ‘Key 8’. Enables the operator to scroll down to
display more information.
G
Menu Key
Press the ‘Menu’ key to go to the ‘Main’ menu. Enables
the operator to pre-set values and settings. Select
options from the ‘Main’ menu to also view data and
readings stored or held.
H
Enter Key
The ‘Enter’ key accepts/confirms choices made by the
operator to various functions and operations. Also,
required to confirm numeric data entry.
I
Scroll Up Key
Also ‘Key 2’. Press scroll up to view further information
on the instrument read screen.
J
Scroll Right Key
Also ‘Key 6’. Press scroll right to view further
information on the instrument read screen.
L
Serial Number
Unique Identification for the instrument. Verification of
the serial number will be required if Technical Support
assistance is needed.
M
Instrument Stand
Instrument stand.