Information
The ‘Information’ option enables the operator to display information such as instrument type, serial
number, current software version, service due date and the dates of the last factory and user
calibrations.
From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
Press ‘Key 1’ to display general information about the instrument.
Screen 6 - Information
Utilities
The ‘Utilities’ option enables the operator to configure instrument settings prior to taking readings.
From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
Press ‘Key 2’ to display the ‘Utilities’ menu and the following screen is displayed:
Screen 7 - G210 utilities menu
Time & Date
The ‘Time & Date’ option enables the operator to check or set the instrument’s internal clock. The
current time/date are appended to every stored reading.
From the ‘Main Read Screen’ press the ‘Menu’ key on the instrument panel.
Press ‘Key 2’ to display the ‘Utilities’ menu.
Press ‘Key 1’ and the ‘Set Time & Date’ menu is displayed:
To Next Page
Loading...
