GeoVision GV-IP Decoder Box - Page 14

8
No. Name Function
6 Loop Start / Stop
z Start or stop sequential display.
z Display and fix at a channel: press the Loop Start / Stop
key, a numeric key and OK to display and fix at the
selected channel. Press 0 and OK to return to the last
displayed channel.
7 Menu Switch to the setup menu.
8 OK
z Save settings in the Setup Menu.
z Display selected channels.
Switch among the 8 resolutions. When the key is pressed, the
Green LED on the front panel flashes. Press No. 0 ~ 7 for the
desired resolution within 30 seconds.
Shift + 0 : VGA_640 x 480
Shift + 1 : VGA_1024 x 768
Shift + 2 : VGA_1280 x 768
Shift + 3 : VGA_1366 x 768
Shift + 4 : High Definition_480p
Shift + 5 : High Definition_720p
Shift + 6 : High Definition_1080i
Shift + 7 : High Definition_1080p
9 Shift
Note after the resolution is configured, the green LED will fade
and GV-IP Decoder Box will reboot automatically.
10 INFO
Shows the camera name and total number of cameras under
display.