34
3.3 Configuring the Play Mode
You can configure the play mode for the live view display. On the main menu, select and
press OK. This window appears.
Figure 3-4
CAM Loop Time Interval: Enter the time interval (in seconds) between each looped
channel. The valid range is from 10 to 600. The default is 30 seconds.
CAM Login ID: Enter the ID of the camera. The default is admin. The maximum
number of characters is 15.
CAM Login Password: Enter the password of the camera. The default is admin. The
maximum number of characters is 15.
NVR Port: Keep the NVR port in default (10000). Modify it only when necessary.
Note: The channels added directly with GV-IP Decoder Box for display must also have the
same ID and password established here.
To Next Page
Loading...
