GeoVision GV-IP Decoder Box User Manual

38
3.6.2 Updating Firmware through GV IP Device Utility
1. On the main menu of GV-IP Decoder Box, select and select the inserted storage
device under Storage.
Figure 3-8
2. Make sure you have installed the GV IP Device Utility program. Double-click the GV IP
Device Utility icon on the desktop. This window appears.
Figure 3-9
3. Click on the IP address of your GV-IP Decoder Box and select Configure. This window
appears.

GeoVision GV-IP Decoder Box Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box
Category	Network Hardware
Language	English