GeoVision GV-IP Decoder Box - 3.2 Setting the Network

System Setup
33
3
3.2 Setting the Network
To configure the network settings for the GV-IP Decoder Box, on the main menu, select
and press OK. This window appears.
Figure 3-3
 DHCP: Select Yes to enable the DHCP function; No to disable the function.
 IP Address: Enter the IP address of the GV-IP Decoder Box.
 Mask: Enter the mask address of the GV-IP Decoder Box.
 DNS: Enter the DNS address of the GV-IP Decoder Box.
 Gateway: Enter the gateway address of the GV-IP Decoder Box.
 MAC: Shows the MAC address of the GV-IP Decoder Box.
 Connected IP: Shows the current IP address at use.