GeoVision GV-IP Decoder Box User Manual

System Setup
37
3
3.6 Upgrading the Firmware
We will periodically release the updated firmware on the website. You may choose to update
firmware locally using a USB drive or SD card, or remotely through the GV IP Device Utility
program.
Before you start:
z Be sure you have inserted a storage device (USB drive or SD card) and it contains one
firmware file only.
z The USB drive or SD card must have at least 100 MB of free space.
3.6.1 Updating Firmware through USB Drive or SD Card
1. Copy the firmware file to the root folder of a USB storage device or a SD card.
2. Connect the USB drive or SD card to the GV-IP Decoder Box.
3. On the setup menu, select
and press OK. This window appears.
Figure 3-7
4. In the Firmware Update field, select USB or SD storage that stores the firmware file.
5. Press OK. The firmware upgrade runs automatically, and the GV-IP Decoder Box will
restart after the firmware upgrade is completed.

GeoVision GV-IP Decoder Box Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box
Category	Network Hardware
Language	English