GeoVision GV-IP Decoder Box User Manual

36
3.5 Configuring the Account, Storage and Output Type
You can configure the account information, select storage and monitor connector, and look up
firmware version. On the main menu, select
of the GV-IP Decoder Box and press OK.
This window appears.
Figure 3-6
 User Login ID: Type the login ID for the GV-IP Decoder Box. The default is admin. The
maximum number of characters is 14.
 User Login Password: Type the password for the GV-IP Decoder Box. The default is
admin. The maximum number of characters is 14.
 Device Name: Name your GV-IP Decoder Box.
 Storage: Select the inserted storage device (USB or SD).
 Output: Select the output format between VGA and High Definition. The available
options for resolution will be automatically brought up.
 Resolution: Select a resolution. The system will reboot when the resolution is modified.
 Firmware Update: Select the device that stores the firmware files. For upgrading steps.
See 3.6 Upgrading the Firmware.
 Firmware Version: Displays the firmware version of the device.

GeoVision GV-IP Decoder Box Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box
Category	Network Hardware
Language	English