GeoVision GV-IP Decoder Box User Manual

9
Chapter 2 Getting Started
2.1 Installing the GV-IP Decoder Box
You can install the GV-IP Decoder Box on wall, behind a VESA monitor or simply use it as
desk mount device.
Wall Mount Installation
For wall mount installation, you need to purchase the wall mount kit.
1. Unscrew the 4 screws on the back panel of the GV-IP Decoder Box.
Figure 2-1
2. Use the 4 small screws in the package to tighten the L-type brackets on the GV-IP
Decoder Box.
Figure 2-2

GeoVision GV-IP Decoder Box Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box
Category	Network Hardware
Language	English