GeoVision GV-IP Decoder Box - 1.2 Compatible Devices GV-IP Decoder Box

Introduction
3
1
1.2 Compatible Devices
The GV-IP Decoder Box is compatible with:
1. Most GeoVision IP devices (of the indicated firmware versions) using H.264 codec, and
2. Third-party IP devices that support H.264 and adhere to RTSP, ONVIF or PSIA.
Supported GeoVision IP Devices
Device Type Models Firmware Versions
GV-BX110D V1.08 or later
Box Camera
All models (except GV-BX110D) V1.06 or later
GV-BL110D V1.08 or later
Bullet Camera
All models (except GV-BL110D) V1.06 or later
Cube Camera
Fixed Dome
Vandal Proof IP Dome
All models V1.06 or later
GV-MFD110 V1.08 or later
Mini Fixed Dome
All models (except GV-MFD110) V1.06 or later
PT Camera
PTZ Camera
GV-PT110D
GV-PTZ010D
V1.08 or later
Speed Dome All models V1.02 or later
GV-VS04H V1.04 or later
GV-VS11 V1.0 or later
Video Server
GV-VS12 V1.05 or later
Compact DVR GV-Compact DVR V3 series only V1.0 or later
IMPORTANT: The connected GeoVision and third-party channels must be set with H.264 codec to be
compatible.
To decode and display non-H.264 IP channels or analog channels, connect the devices to
GV-System and access them through GV-Mobile Server. The supported devices are listed
below.
Supported Devices Connected to GV-System
Analog cameras
All models of GeoVision IP cameras, GV-Video Server, GV-Compact DVR, GV-IP Speed
Dome, GV-Smart Box and GV-DSP LPR
11 brands of third-party IP cameras. For detail, see
http://www.geovision.com.tw/english/4_21.asp