GeoVision GV-IP Decoder Box - 4.6 The IR Remote Control GV-Pad

Introduction
47
4
No. Name Function
6
RIGHT
z Move the cursor right.
z Select a channel on the Device List.
7
STAND BY
Press to enter the Standby mode. In the standby mode, the
screen turns off to minimize power consumption. Press the
key again to enter the ON mode.
8
Power OFF/ON
Switch the power on or off.
9
DC 12V
Connect to power using the supplied power adapter.
4.6 The IR Remote Control
The supplied IR remote control for GV-Pad is the same with GV-IP Decoder Box. For the
functions of each key, see 1.6 The IR Remote Control.
Note: The Menu, OK, Arrow, and Power keys on the IR remote control are also available
on the left panel of the GV-Pad. For detail, see 4.5.2 Left Panel View.