iv
2.4 Installing GV-R/RK/
DFR Conf
ig AP ........................................................................21
2.5 Overlaying Card Numbers on GV-DVR/NVR Live View ..........................................22
2.5.1 Defining the ID Number and Setting the Reader to Slave .............................22
2.5.2 Adding the Reader to GV-DVR/NVR ............................................................24
2.6 Changing the Default Settings of Beeper and LED .................................................25
2.6.1 Setting up Beeper and LED on GV-R/RK/DFR Config AP ............................25
2.6.2 Wiring the Beeper and LED to GV-AS Controller..........................................27
2.6.3 Configuring the Beeper and LED Settings for Each Door/Gate.....................28
2.7 Setting UID or GID on GV-R/RK/DFR Config AP....................................................29
2.8 Firmware Upgrade..................................................................................................31
2.9 Specifications .........................................................................................................32
2.10 Accessory (GV-RK1352 and GV-R1352 Only)......................................................33
Chapter 3 GV-RKD1352......................................................................34
3.1 Packing List............................................................................................................34
3.2 Compatible Products ..............................................................................................34
3.3 Physical Descriptions .............................................................................................35
3.4 Installation..............................................................................................................37
3.5 Keypad...................................................................................................................38
3.6 LED Status and Beeper..........................................................................................38
3.7 Specifications .........................................................................................................38
To Next Page
Loading...
