Gesipa PH 2000 - English

15
GB
Table of Contents
1. Use for intended purpose .........................................................................16
2. Safety information .....................................................................................16
3. Technical data ............................................................................................16
4. Equipment / accessories ..........................................................................17
5. Working capacity .......................................................................................17
5.1 PH 2000 ................................................................................................17
5.2 PH 2000-BT ..........................................................................................17
6. Nosepiece assignment ..............................................................................18
7. Start-up ....................................................................................................... 18
7.1 Selecting and changing the nosepiece .................................................19
7.2 To set a blind rivet .................................................................................19
8. Sucking in and holding a blind rivet ........................................................ 19
9. Emptying the spent mandrels from the container ..................................19
10. Maintenance and care ...............................................................................20
10.1 To clean or change the jaws ................................................................20
10.2 To top up oil .........................................................................................20
10.3 Storage ................................................................................................20
11. Repairs .......................................................................................................21
12. Troubleshooting ........................................................................................21
12.1 Blind rivet is not set ............................................................................21
12.2 Spent mandrel is not conveyed automatically into the container..................21
13. Warranty .....................................................................................................22
14. CE Declaration of conformity ...................................................................22