Getac A140 - Using the WLAN

19
Using the WLAN
The WLAN (Wireless Local Area Network) module supports IEEE 802.11ac,
compatible with 802.11a/b/g/n.
NOTE: Do not block the antenna area.
Turning On/Off the WLAN Radio
To turn on the WLAN radio:
For Windows 10: Tap  Settings  Network & Internet  Wi-Fi. Slide
the Wi-Fi switch to the On position.
For Windows 7: Use either Windows Mobility Center or Getac Quick Bar. To
open Getac Quick Bar, tap and hold the Getac Utility icon on Windows
taskbar and select Quick Bar. Tap the WLAN button in the Quick Bar (an X
over the button means the radio is currently off).
WLAN main antenna
WLAN
auxiliary antenna