Getac A140 User Manual

50
When and How to Use
NOTE:
 The actual setting items on your model may differ from those described
in this chapter.
 The availability of some setting items depends on the Windows version
your computer is running.
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS
Setup Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware.
 You want to modify some specific settings to optimize the system
performance.
To run BIOS Setup Utility:
Method 1: During system startup when the logo screen appears, tap the
screen or press the Windows Logo button on your Tablet PC. In the pre-boot
menu that appears, select Setup Utility. (Tap with your finger. Stylus is not
supported here.)
NOTE:
 If you don’t want any accidental tapping to invoke the pre-boot menu,
you can disable this method by setting the “Screen Tapping for Boot
Options” item in the BIOS Setup Utility.
 When tapping the screen for operating BIOS Setup, use your finger. The
touching of a stylus tip is not supported in this situation.
 For Windows 10 models, the time period in which you can use the above
method is extremely short. You can use the other method as described
below.
Method 2 (for Windows 10 models only): Tap  Settings  Update &
security  Recovery. Under Advanced startup, tap Restart now. In the boot
options menu, tap Troubleshoot  Advanced options  UEFI Firmware
Settings. Tap Restart. In the pre-boot menu that appears, select Setup
Utility.

Getac A140 Specifications

General

LED backlight	Yes
Display diagonal	14 \
Touch technology	Multi-touch
Touchscreen type	Capacitive
Display brightness	800 cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Position location	-
Bus type	QPI
Stepping	D1
Tjunction	100 °C
Processor code	SR2EY
Processor cache	3 MB
Processor cores	2
Processor model	i5-6200U
System bus rate	4 GT/s
Processor family	Intel® Core™ i5
Processor series	Intel Core i5-6200 series
Processor threads	4
Processor codename	Skylake
Processor frequency	2.3 GHz
Processor cache type	Smart Cache
Processor lithography	14 nm
Processor manufacturer	Intel
Processor package size	42 X 24 mm
Processor boost frequency	2.8 GHz
Processor operating modes	64-bit
PCI Express configurations	1x4, 4x1
Supported instruction sets	SSE4.1, SSE4.2, AVX 2.0
Thermal Design Power (TDP)	15 W
Configurable TDP-down frequency	0.8 GHz
Platform	Windows
Operating system installed	Windows 10
Embedded options available	No
Intel Secure Key Technology version	1.00
Intel Stable Image Platform Program (SIPP) version	0.00
Internal memory	8 GB
Internal memory type	DDR4-SDRAM
Maximum internal memory	32 GB
Storage media	SSD
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	128 GB
Graphics card	HD Graphics 520
Rear camera type	Single camera
Rear camera resolution (numeric)	8 MP
Bluetooth version	4.2
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
Docking connector type	Getac 24-pin
USB 2.0 ports quantity	1
Battery voltage	10.8 V
Battery capacity	3220 mAh
Battery life (max)	- h
AC adapter power	65 W
AC adapter frequency	50 - 60 Hz
AC adapter input voltage	100 - 240 V
Storage temperature (T-T)	-51 - 71 °C
Operating temperature (T-T)	21 - 60 °C
Operating relative humidity (H-H)	0 - 95 %
Device type	Tablet PC
Form factor	Slate
Product color	Gray
International Protection (IP) code	IP65
Cable lock slot type	Kensington
Processor ARK ID	88193
Processor socket	LGA 1356 (Socket B2)

Weight and Dimensions

Depth	32.5 mm
Width	369 mm
Height	248 mm
Weight	2300 g