27
Using the Fingerprint Scanner
(Optional)
CAUTION:
For optimal performance, both the scanning surface and the finger
should be clean and dry. Clean the scanning surface when needed. You
can use adhesive tape to remove dirt and oil from the scanner surface.
It is not recommended that you use the fingerprint scanner in a below-
freezing temperature. The moisture on your finger can freeze to the
scanner’s metal surface when you touch it, resulting in a failed operation.
Besides, touching freezing metal with your finger can cause frostbite.
The fingerprint scanner provides a strong authentication mechanism based
on fingerprint recognition. You can log on to Windows and dismiss the lock
screen with an enrolled fingerprint instead of a password.
Enrolling a Fingerprint
NOTE: You can enroll a fingerprint only after creating a password for the
Windows user account.
For Windows 10
1. Click Settings Accounts Sign-in options.
2. On the right side under Fingerprint, click Set up.
3. Follow the onscreen instructions to complete.
For Windows 7
1. Log in to Windows as the user whose fingerprint is to be enrolled.
2. Double-click iMD Fingerprint Reader on Windows desktop.
3. In the fingerprint configuration menu, click Add another.
Fingerprint
scanner
To Next Page
Loading...
Need help?
General
Weight and Dimensions
