Getac A140 - System Recovery (a Tool for Windows 7 Models)

80
System Recovery (a Tool for Windows 7
Models)
Use System Recovery when:
 The Windows 7 operating system does not start at all.
 You want to restore the system to the factory state.
WARNING:
 Using this feature will reinstall Windows to your system and configure it
to the system’s factory default settings. All data on the hard disk drive
will be lost.
 Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
To run System Recovery:
1. Connect the AC adapter.
2. Turn on the Tablet PC. During system startup when the Getac logo screen
appears, double-tap the screen. In the menu that appears, select HDI
Recovery.
Or, if a keyboard is connected, you can press Ctrl + Alt + F2 keys for four
seconds instead of tapping the screen.
3. In the screen that appears, select Recovery to start the recovery process.