Getac B360 Pro - Connecting a Thunderbolt Device

48
Notes and Cautions on USB Charging
 To use the USB charging feature, you must first enable the feature by
running the BIOS Setup program or the G-Manager program. (See
“Advanced Menu” in Chapter 5 or “G-Manager” in Chapter 6.) Otherwise,
the PowerShare USB port functions as a standard USB 3.2 port.
 Before connecting a device for charging, make sure the device works
with the USB charging feature.
 Connect a device directly to this port. Do not connect via a USB hub.
 After resuming from sleep or hibernation, the computer may not detect
the connected device. If this happens, try disconnecting and
reconnecting the cable.
 USB charging will stop in the following situations.
– You shut down the computer by pressing the power button for more
than 5 seconds
– All power (AC adapter and battery pack) is disconnected and then
reconnected during power-off state.
 For USB devices which do not require charging, connect them to other
USB ports on your computer.
Connecting a Thunderbolt™ Device
Your computer has a Thunderbolt 4 port. This port features:
 USB Type-C (or simply USB-C) connector format
 Up to 40 Gbps data transfer speed
 DisplayPort
 USB Power Delivery (Select models only)
Note that you should use the appropriate wattage/voltage USB-C power
adapter for your model.
USB-C power adapter specifications: 90 W or above (20 V, 3.25 A or above)
Applications include storage, display, networking, single-cable docking, and
more.