61
PowerShare USB port functions as a standard USB 3.2 port. For detailed
information on the PowerShare USB port, see “Connecting a Device for
USB Charging” in Chapter 4
MAC Address Pass Through allows the system specific MAC address to
pass through a connected dock, meaning the dock specific MAC address
will be overridden by the system specific MAC address. This feature only
works for UEFI PXE boot.
Active Management Technology Support (This item appears only on
models supporting vPro.)
Intel AMT Support enables or disables Intel® Active Management
Technology BIOS extension execution. AMT allows the system administrator
to access an AMT featured computer remotely.
Intel AMT Setup Prompt determines whether the prompt for entering
Intel AMT Setup appears or not during POST. (This item only appears
when the previous item is set to Enabled.)
USB Provisioning of AMT enables or disables the use of a USB key for
provisioning Intel AMT.
Virtualization Technology Setup sets Virtualization Technology
parameters.
Intel(R) Virtualization Technology enables or disables Intel® VT (Intel
Virtualization Technology) feature which provides hardware support for
processor virtualization. When enabled, a VMM (Virtual Machine Monitor)
can utilize the additional hardware virtualization capabilities provided
by this technology.
Intel(R) VT for Directed I/O (VT-d) enables or disables VT-d (Intel®
Virtualization Technology for Directed I/O). When enabled, VT-d helps
enhance Intel platforms for efficient virtualization of I/O devices.
SW Guard Extensions (SGX) can be set to Disabled, Enabled, or Software
Controlled. Intel® Software Guard Extensions (Intel® SGX) is an Intel
technology for increasing the security of application code. It is used by
application developers.
Device Configuration enables or disables several hardware components.
The items available for setting depend on your model.
Diagnostics and System Tester
H2ODST Tool performs system baseline check.
Recovery Partition allows you to restore your Windows system to the
factory default state by using the “recovery partition” feature. Recovery
To Next Page
Loading...
