Getinge GE15 Installation Manual

6.5 Local standard, typical specification
A typical specification for treated water is:
pH 5.5 to 8
Conductivity <30 µs.cm-1
TDS <40 mg/l
Maximum hardness <50 mg/l
Chlorine <10 mg/l
Heavy metals <10 mg/l
Phosphates <0.2 mg/l as P2O5
Silicates <0.2 mg/l as SiO2
Endotoxins <0.25 EU/ml
Total number of micro-
organisms
<100 per 100 ml
6 WATER QUALITY
38 (48) INSTALLATION MANUAL GETINGE WD15 CLARO
<Doc_INS><Doc_6001396702><Rev.I><Lang_en>

Getinge GE15 Specifications

General

Brand	Getinge
Model	GE15
Category	Laboratory Equipment
Language	English