1.2 Isolator switch
The machine must have a lockable switch for the electric power
supply. A lockable switch is not included in the delivery scope. The
switch must be easily accessible on a wall close to the machine.
The installation must conform to and be marked in accordance with
local regulations.
1.3 The machine must be assembled and installed:
To avoid the risk of back injury, this equipment
should be assembled and installed by two people.
Make sure that the assembly and installation is carried out:
• by qualified personnel.
• in accordance with local regulations and rules.
1.4 In an emergency
• Switch off the isolator switch.
• Close shut off valves in the water supply line.
1 SAFTEY PRECAUTIONS
INSTALLATION MANUAL GETINGE WD15 CLARO 7 (48)
<Doc_INS><Doc_6001396702><Rev.I><Lang_en>
To Next Page
Loading...
