Cleaning / Disinfection / Sterilisation
Cleaning and disinfecting the system
7
LUCEA 50-100
IFU 01741 EN 11
47 / 60
7.1.2 Disinfecting the device
Wipe evenly with a cloth soaked in disinfectant. Follow the manufacturer’s recommendations.
7.1.2.1 Disinfectants to be used
• Disinfectants are not sterilising agents. They result in a qualitative and quantitative reduction
in the microorganisms present.
• Use only surface disinfectants containing combinations of the following active substances:
– Quaternary ammoniums (bacteriostatic for Gram– and bactericidal for Gram+, variable
activity on enveloped viruses, no action on non-enveloped viruses, fungistatic, no spori-
cidal action)
– Guanidine compounds
– Alcohols
7.1.2.2 Permitted active substances
Class Active substances
Low level of disinfection
Quaternary ammonium ▪ Didecyl dimethyl ammonium chloride
▪ Alkyl dimethyl benzyl ammonium chloride
▪ Dioctyl dimethyl ammonium chloride
Biguanides ▪ Polyhexamethylene biguanide hydrochloride
Intermediate level of disinfection
Alcohols ▪ Propan-2-ol
High level of disinfection
Acids ▪ Sulfamic acid (5%)
▪ Malic acid (10%)
▪ Ethylene diamine tetraacetic acid (2.5%)
Tab.14: Lists of active substances suitable for use
Examples of commercially available products tested
• ANIOS product®** : Surfa’Safe®**
• Other products: 20% or 45% isopropyl alcohol
To Next Page
Loading...
Need help?
General
