Technical specifications
Optical specifications
9
LUCEA 50-100
IFU 01741 EN 11
51 / 60
9 Technical specifications
9.1 Optical specifications
Specifications LUCEA 50 LUCEA 100 Tolerance
Nominal illumination 60,000lx 120,000lx ± 10 %
Diameter d10 22 cm ± 3 cm
Diameter d50/d10 0,55 ± 0,05
Illumination depth at 20% 190 cm 105 cm ± 15%
Illumination depth at 60% 120 cm 55 cm ± 15%
Colour temperature 4 500 K ± 400 K
Colour rendering index (Ra) 96 ± 4
Special colour rendering index (R9) 92 +10 / -20
Irradiance (Ee) < 250 W/m² < 500 W/m²
Radiant energy 3.9 mW/m²/lx ± 0.4
UV illumination ≤ 0.7 W/m²
FSP system Yes
Tab.18: Table of LUCEA 50-100 optical data
Specifications LUCEA 50 LUCEA 100 Tolerance
With one mask 5% 42% ± 10
With two masks 58% 49% ± 10
At base of tube 100% 96% ± 10
With one mask, at base of tube 5% 38% ± 10
With two masks, at base of tube 58% 46% ± 10
Tab.19: LUCEA 50-100 residual illumination
NOTE
These values are measured with the small light field diameter.
The test value for the masks must necessarily remain above 0%.
See also
2 Certif_LED_lifetime_LCA50100 [}52]
2 Certif_blue_risk_LCA50100 [}53]
To Next Page
Loading...
Need help?
General
