Maintenance procedures
Tools required for maintenance
4
Maquet PowerLEDII
01810 EN 03
15 / 56
4 Maintenance procedures
4.1 Tools required for maintenance
NOTICE
After-sales service kits are available on the spare parts platform
.
The LinkOne platform is accessible on the GetingeOnline portal:
https://swp-linkone.getingegroup.local/
Part No. Description
ARD572034999 OPM 039 - LUXMETER + SENSOR
ARD572059999 OPM 051 - METRIX MX MULTIMETER (54-59HD)
N/A - IEC 62353-compatible electrical insulation and continuity tester
-
N/A 2-10 Nm torque wrench
10-50 Nm torque wrench
40-200 N.m torque wrench
ARD687000011 OPM 085 - INSULATED ANGLED PLIERS
N/A Set of Allen screwdrivers
N/A Set of Torx screwdrivers
N/A Set of open-end wrenches
N/A Set of flat-bladed screwdrivers
N/A Set of Philips screwdrivers
N/A Adjustment rod for Acrobat 2000 arm
ARD659000011 Grease in can
ARD659000016 Aerosol grease
ARD368904555 VA - TUBE OF GREASE, 5 ML
4.2 Periodic maintenance
4.2.1 Periodic replacement cycles
To ensure safety and performance, please follow the recommendations below.
To Next Page
Loading...
Need help?
General
