Getinge Maquet SERVO-i - Page 29

SERVO-s
• Loosen the screw.
• Pull out the cover.
3.3.2 Replacement of O
2
cell and/or
bacterial filter
• Lower the locking catch.
• Disconnect the O
2
cell connector.
• Lift and discard the O
2
cell with the rubber
seal to special waste and/or remove and
discard the bacterial filter to hazardous
waste.
• Ensure that the new rubber seal is intact,
then firmly put in a new bacterial filter.
SERVO-i/s, User's Manual
29
| Maintenance |
3 |