110
The figure above shows the WPS status.
Registrar Settings
When selecting Registrar mode, system displays the Registrar Settings table.
Registrar Settings table provides OPEN, WPA-PSK, and WAP2-PSK authentication
modes.
- OPEN
When selecting the OPEN authentication mode, the system displays the following
page:
The parameters of OPEN authentication mode are described as follows:
Field Description
SSID Set the network name.
Authentication Select OPEN mode in the drop down list.
Encrypt Type You may select NONE or WEP. When selecting
WEP, you are allowed to set the encryption type
and key.