86
Note:
In the WDS mode, do not set any mixed modes, for example, WPA-PSK/WPA2-PSK.
Do not set all the WDS APs to be Lazy mode, please ensure that at least one WDS
AP acts as Root Bridge, and enter the MAC addresses in the WDS table on the
Basic Wireless Settings page.
Establishing a Network by WDS Bridge Mode
The following description shows how to use the WDS bridge modes of two devices to
establish a network. You may add more devices to establish a network.
Suppose that there are two APs. One is AP1, the other is AP2. Enable the DHCP
server of AP1 and AP2.
To Next Page
Loading...
Need help?
General
