Gigaset N720 DECT IP User Manual

86
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / web-conf.fm / 06.02.2012
Version 2, 06.08.2010
You can expand or change the settings for call transfer as follows:
u Transfer Call by On-Hook: The two participants are connected with one another when
you press the end call
key. The intermediary's connections with the participants are
terminated.
u Use the R key to initiate call transfer with the SIP Refer method: Deactivate call
transfer with the R key if you want to assign a different feature to the R key (see below
"Defining R key functions for VoIP (hook flash)")
u Specify how target addresses are selected in the SIP protocol:
¤ Determine target address automatically
The participant is automatically determined by the number entered and the SIP
information.
¤ Derive target address
You specify how the target address is to be determined:
– from the SIP URL
– from the SIP contact header
u Specify whether the first call is to continue while the second participant is being called,
when a call is forwarded. There are two ways of doing this:
– For attended transfer: This procedure ensures that the call actually takes place.
– For unattended transfer: The first connection to the participant is ended after the
call is transferred.
Defining R key functions for VoIP (hook flash)
Your PABX/VoIP provider may support special performance features. To make use of these
features, your phone needs to send a specific signal (datapacket) to the SIP server. You can
assign this "signal" as the R function to the R key on the handsets.
¤ Enter the data received from your provider in the Application Type and Application
signal fields.
If the user presses this key during a VoIP call, the signal is sent.
Please note
For IP telephony, the call is transferred via the SIP protocol.
The unique address is derived from the SIP-URL (SIP-URI). As well as the SIP-URL, the
SIP contact header contains additional information for transferring data between the
sender and recipient.

Gigaset N720 DECT IP Specifications

General

Brand	Gigaset
Model	N720 DECT IP
Category	Telephone Accessories
Language	English