Warning
●A
ctive medical devices are subject to special EMC precautions and they must be installed and used
in accordance with these guidelines.
●Electromagnetic fields can affect the performance of the device, so other equipment used near the
equipment must meet the appropriate EMC requirements. Mobile phones, X-rays, or MRI devices
are possible interference sources, as they emit high-intensity electromagnetic radiation.
●The use of ACCESSORIES, transducers and cables other than those specified, with the exception
of transducers and cables sold by the MANUFACTURER of the the device as replacement parts for
internal components, may result in increased EMISSIONS or decreased IMMUNITY of the ME
EQUIPMENT or ME SYSTEM.
●The device should not be used when they are close to or stacked with other equipment, if necessary,
please observe and verify that they can operate normally in the configurations.
●Devices or systems may still be interfered by other equipment, even if other equipment meets the
requirements of the corresponding national standard.
●The device requires special precautions for electromagnetic compatibility (EMC) and requires
qualified personnel to install and use in accordance with the EMC information provided below.
●The device should not contact the pins of connectors marked with an ESD warning symbol, unless
electrostatic discharge precautions are used, the device should not connect to these connectors.
To Next Page
Loading...