BLE MQTT Bridge
Bluetooth Low Energy (BLE) is widely used for smart home, wearable and IoT
sensors. This feature is for GL.iNet BLE gateway, GL-X750 Spitz and GL-S1300
convexa S which has built-in BLE modules. Read this to learn how to use them
forward your BLE data to the cloud based on MQTT protocol, including GL.iNet
GoodCloud and AWS IoT.
GoodCloud and VPN
If you enable GoodCloud feature on router and also use it as VPN client, there is
something important you need to know.
At default, GoodCloud process use VPN if you enable VPN client(eg. WireGuard,
OpenVPN, Shadowsocks), this bring a problem that if you VPN is configured
incorrectly, GoodCloud will not work properly. In order to ensure the normal use
of GoodCloud, we suggest you to follow the steps below to enable VPN Policies
and disable "Use VPN for all process on the router". After you've done these
steps, GoodCloud precess will not use VPN.
To Next Page
Loading...
