EasyManuals Logo

GL-INET Opal User Manual

GL-INET Opal
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
Page 138 | 153
Mac
a. Go to System Preferences -> Network.
b. Chooose Ethernet -> Advanced -> TCP/IP.
c. In Configure IPv4, choose Manually.
d. Set the IPv4 Address to 192.168.1.2 manually.
6. Use Firefox or Chrome to visit http://192.168.1.1.
7. Click Choose File to find the firmware file. Then click Update firmware.
For GL-AR300M, GL-AR300M-Ext, GL-AR750S-Ext, please download the .img
firmware file and upload to the NAND

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GL-INET Opal and is the answer not in the manual?

GL-INET Opal Specifications

General IconGeneral
RAM128 MB DDR2
WiFi802.11b/g/n
USB Port1 x USB 2.0
VPN SupportOpenVPN, WireGuard
Operating SystemOpenWrt
ProcessorQCA9531, 650MHz
Flash Storage16 MB
Ethernet Ports2 x 10/100 Mbps
Power Input5V/2A

Related product manuals