EasyManuals Logo

GL-INET Opal User Manual

GL-INET Opal
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Page 26 | 153
(2) Compile your own firmware
You can compile your own firmware and flash to the router. Please refer to
https://github.com/gl-inet/openwrt
https://github.com/gl-inet/imagebuilder
(3) Third party firmware
You may also try other firmwares such as DDWRT.
Note: If you uploaded an incompatible firmware thus bricked the router, please use
Uboot to re-install the correct firmware.
5.3. Auto Upgrade
You can enable auto upgrade. The router will search for available update and
upgrade automatically according to the time that you set.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GL-INET Opal and is the answer not in the manual?

GL-INET Opal Specifications

General IconGeneral
RAM128 MB DDR2
WiFi802.11b/g/n
USB Port1 x USB 2.0
VPN SupportOpenVPN, WireGuard
Operating SystemOpenWrt
ProcessorQCA9531, 650MHz
Flash Storage16 MB
Ethernet Ports2 x 10/100 Mbps
Power Input5V/2A

Related product manuals