GL-INET Opal User Manual

Page 18 | 153
Bandwidth: The channel frequency coverage range of the Wi-Fi. It is suggested to
use default parameter.
Channel: The router will not choose the best channel itself. You need to choose a
channel manually. If your router is used as a Wi-Fi repeater, the channel will be
fixed according to the connected wireless network.
TX Power (dBm): It specifies the signal strength.
Channel Optimization: It will optimize your Wi-Fi signal and channel according to
the Wi-Fi environment.

GL-INET Opal Specifications

General

RAM	128 MB DDR2
WiFi	802.11b/g/n
USB Port	1 x USB 2.0
VPN Support	OpenVPN, WireGuard
Operating System	OpenWrt
Processor	QCA9531, 650MHz
Flash Storage	16 MB
Ethernet Ports	2 x 10/100 Mbps
Power Input	5V/2A