GL-INET Opal User Manual

Page 48 | 153
(2) Add a new client
You have to add a new user and apply the configurations when you are
connecting to this WireGuard server.
Click Management tab and then Create a New User.
Specify the Name of the new client and then click Add.
(3) Get the configuration details for your client
You can now check the list of the clients you added. You can Delete any
unwanted client. Please click Configurations to find the configuration details
which you need to use when you are setting up WireGuard client. We provide
QRcode, Plain Text and JSON configurations currently.

GL-INET Opal Specifications

General

RAM	128 MB DDR2
WiFi	802.11b/g/n
USB Port	1 x USB 2.0
VPN Support	OpenVPN, WireGuard
Operating System	OpenWrt
Processor	QCA9531, 650MHz
Flash Storage	16 MB
Ethernet Ports	2 x 10/100 Mbps
Power Input	5V/2A