GL-INET Opal User Manual

Page 91 | 153
As show above, click "Processed to xxxxxxx.glddns.com (unsafe)".
After you enable HTTPS Remote Access, you can access Admin Panel anywhere
by your DDNS url of https, e.g. https://xxxxxxx.glddns.com. If you use port forward,
you should be access like https://xxxxxxx.glddns.com:YourExternalPort.
6) SSH Remote Access
This function requires a public network IP.
If your router is behind NAT, you may need to set up port forward in higher level
router. It use port 22.
Follow the steps above, to enable SSH Remote Access, then you can ssh to your
router anywhere.
7) Turn Off
If you don't want to use DDNS, just disable it.

GL-INET Opal Specifications

General

RAM	128 MB DDR2
WiFi	802.11b/g/n
USB Port	1 x USB 2.0
VPN Support	OpenVPN, WireGuard
Operating System	OpenWrt
Processor	QCA9531, 650MHz
Flash Storage	16 MB
Ethernet Ports	2 x 10/100 Mbps
Power Input	5V/2A