Need help?Do you have a question about the GME XRS-330C and is the answer not in the manual?
Lists the various features available on the XRS Connect radio.
Details the XRS Connect and XRS Location Services apps.
Explains the basic operation and controls of the radio.
Describes the three scan groups: Open, Priority, and Network Scan.
Explains how to add or remove channels from scan memories.
Allows temporarily removing busy channels from the scan sequence.
Allows monitoring two channels simultaneously.
Allows scanning channels in an ascending sequence.
Monitors priority channel while scanning others.
Instructions on how to select and use Priority Scan.
Enables group communication on congested bands.
Steps to select network scan and a CTCSS/DCS code.
How to operate the Net-Scan feature.
How to stop the scanning function.
Guidance on selecting between CTCSS and DCS systems.
Information on CTCSS tone set compatibility.
How to enable silent mode using CTCSS/DCS.
Prevents transmitting on a busy channel.
Allows brief monitoring of channels in silent mode.
Explains the radio's unique SelCall Identification number.
How to add names to SelCall numbers for easier identification.
Mutes the receiver until a SelCall is received.
Steps to send, program, or change a SelCall number.
How the radio alerts the user to an incoming SelCall.
Detailed setup and operation of the Quiet mode.
How to activate the Quiet mode on selected channels.
How signals are received in Quiet and Open modes.
How to scan while Quiet mode is active.
Process for entering and sending a Group Call Ident.
Explains the absence of Call Acknowledge in Group Calls.
How to store Group Call Idents.
How a Group Call is received.
Examples of context menus displayed on the radio.
Steps to select a desired zone from the list.
Instructions to edit the name of a zone.
Process to add channels to a newly created zone.
How to edit or delete channels within a zone.
How to turn secure PIN pairing on or off for Bluetooth.
Function assigned to an XRS button press.
Function assigned to an XRS button hold.
Function assigned to a top button hold.
Guide to programming the XRS button functions.
Guide to programming the top button functions.
Details on using Net-Scan with CTCSS/DCS sub-tones.
Steps to enter and send a SelCall number.
How to resend the last SelCall number.
Process for editing the name of a contact.
How to edit the radio's own SelCall number.
Steps to add a new contact to SelCall memory.
Allows radio to broadcast location via Location Services app.
Feature to record and playback voice transmissions.
Mutes radio during phone calls via Location Services app.
General information about installing the radio.
Steps for screwing the mounting cradle to a surface.
Diagrams showing radio mounting dimensions.
How to connect the microphone to the radio.
Explains the radio's DC power requirements.
Wiring for power that stays on with ignition off.
Wiring for power that turns on/off with ignition.
System to warn of over-voltage conditions.
Guidance on selecting and connecting an antenna.
Tips for reducing noise interference.
Electrical specifications for the radio.
Technical specifications for the transmitter.
Technical specifications for the receiver.
Mechanical details and connection types.
General| IP Rating | IP67 |
|---|---|
| Transmit Power | 5 Watt |
| Channels | 80 |
| Display | LCD |
| Operating Voltage | 7.4V DC |
| Power Supply | Rechargeable battery |
To Next Page
