B-8
QUICK OPERATING INSTRUCTIONSUSER HANDBOOK
Clear Flow Fault (Conned Space Mode):
Press and hold RH button to acknowledge ow fault once ow
blockage has been cleared.
View Barhole Results:
Press and hold LH button to view this and previous barhole
results to a maximum of six barhole tests.
Ticker (Geiger) - PPM Range:
Press and hold UP and DOWN buttons simultaneously to
enable / disable audible Ticker (Geiger), as follows:
Press and hold both buttons - to enable visual only.
Press and hold both buttons again - to disable both audible and visual.
Press and hold both buttons again - to enable both audible and visual.
To Next Page
Loading...
Need help?
General
