4.0
ENG
GLT
Ω
L
IFT
O
PERATION
M
ANUAL
Page | 13
Aluminum
Recommended cleaning products: liquid cleaning and degreasing agents. Apply with a soft cotton cloth or sponge and
wipe dry.
Copper, brass, bronze
Recommended cleaning products: liquid cleaning agents for chrome and brass. Apply with a soft cotton cloth, polish
and wipe dry.
Wood and veneer
Recommended cleaning products: liquid degreasing and cleaning agents. Apply with a soft cotton cloth or sponge,
polish and wipe dry.
Glass and mirrors
Recommended cleaning products: commercially available glass cleaning fluids. White spirit diluted with water. Apply
with a soft cotton cloth, polish and wipe dry.
Synthetic resin panels
Recommended cleaning products: commercially available plastic cleaning agents (containing alcohol). Clean with a
soft cotton cloth. Apply cleaning agents in moderation. Clean, polish, dry.
Painted finishes
Recommended cleaning products: degreasing and mild liquid agents based on alcohol or hydrocarbons. It is advisable
to test the reaction on a small hidden surface before using it on all the material. Clean with a soft, dry cotton cloth.
Plastic laminates
Recommended cleaning products: commercially available plastic cleaning agents containing alcohol only. It is
advisable to test the reaction on a small hidden surface before using it on all the material. Clean with a soft, dry cotton
cloth.
Carpets
Recommended cleaning products: commercially available carpet cleaning products or solvents based on
hydrocarbons, chlorinated hydrocarbons or alcohol. Clean with a vacuum cleaner, lather and rinse with a wet sponge.
Let it dry well.
Synthetic / rubber floor coverings
Recommended cleaning products: liquid cleaning and degreasing agents or alcohol (eg propyl alcohol). Wipe with a
damp floor cloth.
Stones and tiles
Recommended cleaning products: soapy water (on wet cloths).
Seals of the thresholds and decking surfaces
Recommended cleaning products: wet cloths (do not use detergents).
Brush the channels to remove dirt and dust. Use a vacuum cleaner if necessary.
Clean the surface with a wet cloth.
celing lighting
Disconnect the power supply.
Caution: Danger of electric shock!
Clean the surface using a dry cloth.
Recommended products: Clean the surfaces with a dry and clean cloth.
To Next Page
Loading...