4.0
ENG
GLT
Ω
L
IFT
O
PERATION
M
ANUAL
Page | 83
X.c Remote unlocking landing door device
Check
- That the cable in the sheath run properly and, if necessary, lubricate it,
- That the fixing clamps are clean and properly tightened
- That the unlocking device is working properly:
- Pulling the handle the door locking device must unlock and allow to manually open the door.
X.d Retractable apron
Check that the retractable apron has a regular and easy movements and that its locking bolts
are properly tightened.
Check that the electrical safety contact (SGR) is properly fixed and working.
- The security chain is closed: If the retractable apron is closed
- The security chain is open:
- If the retractable apron is extended (also partially)
- If the retractable apron returns to close position after it has been extended.
(System reset required).
X.e Emergency key safety switch
Check, at each floor, that the electrical safety contact (SKPn) is properly fixed and working:
- The security chain is closed: If the triangular key is in the lock position
- The security chain is open:
- If the triangular key is in the unlock position
- If the triangular key, after unlock, returns to lock position. (System reset required)
9 DISPOSAL MATERIAL
The plant contains recyclable materials. Do not dispose of them in the environment but
collaborate in separate collection (Directive 2006/66 / EC).
In particular:
PET (Polyethylene terephthalate), PE (High- and low-density
polyethylene),
PVC (Polyvinyl chloride), PS (Polystyrene or Polystyrene),
ABS (Acrylonitrile butadiene styrene)
Paper, Iron, Aluminum, Wood, Glass
In addition, the following materials, when replaced, must not be dispersed in the environment but
must be delivered to authorized collection centers, the manufacturer or specialized and preferably
certified companies
The Fluid
The control unit, the piston, the pipes, the winch.
Electrical and electronic equipment, batteries and / or accumulators, lamps. (WEEE).
To Next Page
Loading...