4.0
ENG
GLT
Ω
L
IFT
O
PERATION
M
ANUAL
Page | 5
1 GENERAL INFORMATION
1.1 PURPOSE OF THE MANUAL
The purpose of this manual is to describe the operations required to use the lift.
For any lifts with specifications other than those given in this manual, please contact GMV S.p.A.
1.2 RECIPIENTS
The manual is intended for lift users. It contains topics that refer to correct operation of the lift.
It is the lift owner’s responsibility to keep this documentation intact so that it can be consulted at any time.
1.3 SUPPLY AND STORAGE
The manual is provided in electronic format and can also be downloaded from https://www.gmv.it/
All additional technical documentation (maintenance manual, lift installation manual and attachments, wiring
diagrams) is provided with this manual.
Keep this manual supplied with the lift in the electrical cabinet so that it can be easily consulted by installers and
maintenance personnel.
The manual is an integral part of safety, therefore:
• it must be kept intact (in all its parts). If it is lost or damaged, a copy should be requested immediately.
• it must accompany the lift until it is demolished (even if it is moved, sold, etc.);
The attached manuals are an integral part of this documentation and the same requirements/instructions apply to
them as to this manual.
The Manufacturer accepts no liability for improper use of the lift and/or for damage caused as a result of operations
not covered by the technical documentation.
1.4 UPDATES
If the lift needs functional modifications or replacements, the Manufacturer is responsible for reviewing or updating
the manual. The Manufacturer is responsible for delivering the updated manual.
Furthermore, the user is responsible for ensuring that, should this document be changed by the Manufacturer, only
updated versions of the manual are actually present at the points of use.
1.5 LANGUAGE
The original manual is written in Italian.
Any translations into additional languages must be done from the original instructions.
The Manufacturer is responsible for the information in the original instructions; translations into other languages
cannot be fully verified, so if any inconsistency is found, the original language text must be followed or you can
contact our Technical Documentation Office.
To Next Page
Loading...