4.0
ENG
GLT
Ω
L
IFT
O
PERATION
M
ANUAL
Page | 25
DESCRIPTION OF PREFERENTIAL OPERATION TO ONE FLOOR
To perform the preferential operation to one floor, a “1 Position + Return” key switch must be used on one floor
and a “1 Extraction – 2 Positions” key switch must be used in the car. The preferential operation is activated on the
floor. Proceed as follows:
STEP
ACTION PICTURE
1
Insert a key into the switch.
2
Turn the key switch to “T”.
This way:
• the floor switch automatically returns to “E” and the key can be removed;
• all recorded calls are cancelled and the car reaches the floor on which the key switch was activated.
After entering the car, within a time limit, the switch can be used in the car to activate “Reserved Operation” as
described above. In the standard version, the same key is used on the floor and in the car, but different keys can be
used on request.
To Next Page
Loading...