4.0
ENG
GLT
Ω
L
IFT
O
PERATION
M
ANUAL
Page | 35
IN THE ABSENCE OF ELECTRICITY
CAUTION!
Ensure that all landing doors are closed and locked.
IMPORTANT!
Warn trapped people of the impending car movement before starting the emergency operation.
To perform the electrical emergency operation in the absence of electricity, proceed as follows:
STEP
ACTION PICTURE
1
Open the main power switch “QFM”.
2
Insert and hold the key “SMEQ”.
The board “EM01” will now be turned on.
3
Wait 5 seconds and then press and hold down the button “SMFQ”
that powers the brake, until the floor is reached, which is done
when the “HZP” LED lights up.
4
Check the direction and speed of the car on the display (if provided).
Alternatively, it is possible to view the direction with the “FS” (up) or “FD”
(down) LEDs and the speed with the position LEDs from “PS1” to “PS6”
on the basic board “STK1R”.
5
Once the floor is reached, the doors are automatically opened.
6
If the car does not move, repeat the procedure turning the switch
“SMMQ” to [INSPECTION] before inserting the key “SMEQ”.
7
After releasing the car, close and lock the doors, then turn the switches
back to “0” and [NORMAL].
To Next Page
Loading...